Personalizing The Front Panel; Removing The Protective Covers; Replacing The Protective Covers - Whirlpool Cool Impression room air conditioners Owner's Manual

Personalizing the
Front Panel
(available on select models)
The appearance of the front panel can be customized to suit your tastes or to match the
room. The panel has two clear, protective plastic covers that you can remove. Then, place
wallpaper, fabric, pictures, etc., in the open areas and replace the protective covers.
Removing the protective covers
1. Place the flat edge of a screwdriver into
the 1 mm gap between the protective
cover and the front panel.
2. Carefully pry off the protective cover.
3. Repeat for second protective cover.
Replacing the protective covers
1. Insert tabs on one side of the protective
cover into the tabs in the corresponding
side of the front panel.
2. Snap the other side of the cover into
place.
3. Repeat for second protective cover.
12