Turning The Unit Off; Using The Dry Only Cycle; To Activate The Dry Only Cycle; To Modify The Fan Speed - Whirlpool Cool Impression room air conditioners Owner's Manual

To turn the unit off, simply press the OFF
Button. This stops any currently-operating
cycle and the unit completely shuts off.
NOTE: When turning unit off from the AUTO
COOL Cycle, the air conditioner remembers
any changes you made during the AUTO
COOL Cycle and adjusts the cycle the next
time you operate it.
IMP0RTAN.T: After turning the unit off,
wait approximately 3 minutes before
1 turning it back on. If you don't wait
3 minutes, the air conditioner will try to
start, but turn itself off until the compressor
1 is ready to start again.
(I
OFF
Using the DRY ONLY Cycle
The DRY ONLY Cycle allows your air
conditioner to operate as a dehumidifier. It
removes excess moisture from the room air
without providing much cooling. The cycle is
preset to operate most efficiently at LOW
fan speed.
To activate the DRY ONLY Cycle:
l
Press the DRY ONLY Button.
NOTE: When the cycle is active, the
indicator light on the DRY ONLY Button
will be lit.
To modify the fan speed:
l
Press the FAN SPEED Button.
NOTE: Each press advances the fan
speed:
LOW -+ HI + MED + LOW
To deactivate the DRY ONLY Cycle:
You can deactivate the DRY ONLY Cycle
two ways:
l
Press the OFF Button.
OR
l
Activate another cycle
(for example: AUTO COOL).
0
FAN SPEED
8