Personalizing The Front Panel - Whirlpool 3QACM07XD2 Owner's Manual

Personalizing the
Front Panel
(available on select models)
The appearance of the front panel can be customized to suit your tastes or to match the
room. The panel has a clear, protective plastic cover that you can remove. Then, place
wallpaper, fabric, pictures, etc., in the open area and replace the protective cover.
Removing the protective cover
1. Place the flat edge of a screwdriver into
the 1 mm gap between the protective
cover and the front panel.
2. Carefully pry off the protective cover.
U
Replacing the protective cover
1. Insert tabs on one side of the protective
cover into the tabs in the corresponding
side of the front panel.
2. Snap the other side of the cover into
place.
7