Sirius/Xm Control; Source Control Screen - Kenwood DNX9980HD Instruction Manual

SIRIUS/XM Control

Various control screens appear in the Satellite radio source mode. (Only with the optional accessory Satellite
radio connected. To connect the SIRIUS tuner, a conversion cable CA-SR20V (optional accessory) is necessary
and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.)
• This document uses the SIRIUS display as an example.

Source Control Screen

Switches to control screen to use various functions.
1 Display the Source Control Screen
See <How to Display the Source Control Screen>
(page 16).
2 Operation on the Source Control screen
1
[BAND] Switches the band.
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
2 Display the Category List or Channel List
Screen. See <Category/ Channel Search> (page
47).
1 Information display
Displays information concerning music being
played.
Changes the display from Channel
SIRIUS SIRIUS
Name, Song Title Name, Artist Name,
Composer Name, to Category Name.
Changes the display from Channel
XM XM
Name, Artist Name, Song Title Name, to
Category Name.
Displays the ID number when Channel 0 is
selected.
Displays the SIRIUS ID.
SIRIUS SIRIUS
Displays the RADIO ID.
XM XM
"SR"/ "XM" Band display
"Preset" Preset number
"ch"/ "CH" Channel display
[ ] When the text is longer, the text display is
scrolled by touching it.
46
DNX9980HD
Multi Function
2
[1/2] Switches the multi function display.
[
[P1] – [P6] When [P1] to [P6] buttons appear, you
can recall the channel on memory. For memory
of channel stations, see
(page
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display
"SEEK1"
"SEEK2"
[DIR] You can tune in by entering the desired
channel number. See
(page
[INFO] Displays the program information screen.
[SCN] Starts or stops Channel Scan (that tunes
channels one after the other).
[PRE] Lists and selects memorized channel. See
<Preset Select> (page
] Closes the multi function bar.
<Channel Memory>
47).
Setting
Tunes channels one after the other.
Selects channels in memory one after
the other.
<Direct Channel Search>
48).
48).