Listening Position; [Audio Control] - Kenwood DNX9980HD Instruction Manual

Audio Control

Listening Position

You can adjust the sound effects according to your
listening position.
1 Display the Position screen
>
Touch [ ] [
2 Set the Position Control
[P1] - [P3] Stores the present adjustment setup
in memory, or recalls it from memory.
To store your adjustment in memory:
Continue to touch [P1] to [P3] more than 2
seconds.
To call your adjustment from memory:
Touch [P1] to [P3] of your adjustment you wish
to recall from memory.
[2], [3] Sets a listening position.
You can select any of "Front R" (Right front),
"Front L" (Left front), "Front All" (All front), "All"
(All), and "User" (User) positions.
[DTA] Displays the Position DTA (Digital Time
Alignment) screen.
3 Exit Position Control
⁄
• The final distance is adjusted to the total of Car Type
Set Up value (page 70) and Position Setup (both Position
and Position DTA) value.
• If you change the Car Type Set Up value (page 70), the
position is set to "All".
• Only the adjusted distance of position setup (Position
and Position DTA values) is stored in memory. Therefore,
the final adjustment distance changes if you change
the Car Type Set Up value (page 70).
66
DNX9980HD
>
] [Position]. (page 64)
Position DTA Control
You can fine-adjust your listening position.
1 Display the Position DTA screen
2 Select a speaker you wish to adjust
1
3
2
4
5
6
1 Center speaker
2 Left front speaker
3 Right front speaker
4 Left rear speaker
5 Right rear speaker
6 Subwoofer
[2], [3] Finely adjusts the value set with the
Position function.
[Total DTA] Indicates setup distance. The
adjusted distance (Position and Position DTA
values), and the total of the distance adjusted
by Car Type Set Up (page 70) and the adjustment
distance for position setup are indicated.
3 Finely adjust the distance
Finely adjust the value set with the Position
function.