Auto Memory - Kenwood DNX9980HD Instruction Manual

Multi Function
[1/2] Switches the multi function display.
[ ] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons appear, you
can recall the stations on memory.
For memory of broadcasting stations, see
Memory> (page 37) or
38).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page
[RCV] The Receive mode switches in the
following order. See <Receive mode> (page
[PTY]
Searches station by program type.
FM FM
See <Search by Program Type> (page
[INFO] Displays HD Radio Information screen. See
<Information> (page
[CH-List] Display the Channel List Screen. See
<Channel Search> (page
<Auto
<Manual Memory> (page
37).
41).
40).
39).
39).

Auto Memory

Stores stations with good reception in memory
automatically.
1 Display the Source Control Screen
See <Source Control Screen> (page
2 Select a band you wish to store in memory
3 Select the Auto Memory mode
4 Start Auto Memory
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
• The operation ends automatically if you do not operate
within 10 seconds.
36).
Next page 3
37
English