Sirius/Xm Control; Source Control Screen; Category/ Channel Search; Channel Memory - Kenwood DNX9980HD Instruction Manual

SIRIUS/XM Control

Various control screens appear in the Satellite radio source mode. (Only with the optional accessory Satellite
radio connected. To connect the SIRIUS tuner, a conversion cable CA-SR20V (optional accessory) is necessary
and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.)
• This document uses the SIRIUS display as an example.

Source Control Screen

Source Control Screen
Switches to control screen to use various functions.
1 Display the Source Control Screen
See <How to Display the Source Control Screen>
(page 16).
2 Operation on the Source Control screen
2 2 2
1 1 1
[BAND] Switches the band.
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
2 Display the Category List or Channel List
Screen. See <Category/ Channel Search> (page
47).
1 Information display
Displays information concerning music being
played.
Changes the display from Channel
SIRIUS SIRIUS
Name, Song Title Name, Artist Name,
Composer Name, to Category Name.
Changes the display from Channel
XM XM
Name, Artist Name, Song Title Name, to
Category Name.
Displays the ID number when Channel 0 is
selected.
Displays the SIRIUS ID.
SIRIUS SIRIUS
Displays the RADIO ID.
XM XM
"SR"/ "XM" Band display
"Preset" Preset number
"ch"/ "CH" Channel display
[ ] When the text is longer, the text display is
scrolled by touching it.
46 DNX9980HD
Multi Function
[1/2] Switches the multi function display.
[ ] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons appear, you
can recall the channel on memory. For memory
of channel stations, see <Channel Memory>
(page 47).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"SEEK1" Tunes channels one after the other.
"SEEK2" Selects channels in memory one after
the other.
[DIR] You can tune in by entering the desired
channel number. See <Direct Channel Search>
(page 48).
[INFO] Displays the program information screen.
[SCN] Starts or stops Channel Scan (that tunes
channels one after the other).
[PRE] Lists and selects memorized channel. See
<Preset Select> (page 48).

Category/ Channel Search

Category/ Channel Search
Specifying the desired category and selecting a
channel.
1 Display the Source Control Screen
See <Source Control Screen> (page 46).
2 Display the Category List or Channel List
Screen
1 1 1
⁄
• Touching 1 displays the previously used category list,
or channel list.
3 Select a category
2 2 2
1 1 1
1 Selects a category.
Displays all the channels in the selected
category.
[ ] When the text is longer, the text display is
scrolled by touching it.
[All Channel] Displays all the channels.
2 Returns to the Source Control screen.
4 Select a channel
2 2 2
1 1 1
1 Selects a channel.
Tunes in the selected channel.
[Info Change] Switches the sequence of the list.
Changes the display from Channel
SIRIUS SIRIUS
Name, Song Title, Artist Name, Composer
Name, to Category Name.
Changes the display from Channel
XM XM
Name, Artist Name, Song Title, to Category
Name.
[ ] Display the category list.
2 Returns to the Source Control screen.

Channel Memory

Channel Memory
Stores the current receiving channel in memory.
1 Display the Source Control Screen
See <Source Control Screen> (page 46).
2 Select a channel you wish to store in memory
3 Store in memory
2 sec.
Continue to touch until the memory number
appears.
Next page 3
English 47