Preparing Installation Files; Preparing Needed Tools; Choosing The Installation Site - Avaya P334T-ML Quick Start Manual

Before you Start

Preparing Installation Files

Ensure that you load the latest versions of the firmware file for the . You can download the
firmware file needed for your installation from the Avaya Support Web site, at
support.avaya.com.

Preparing Needed Tools

Prepare the tools you need to mount the , according to the
Table 1: Mounting Tools
If you need to mount on...
Rack

Choosing the Installation Site

Ensure that the location where you install your fulfills the following requirements:
Cables are away from sources of electrical noise such as:
●
radio transmitters
●
broadcast amplifiers
●
power lines
●
fluorescent light fixtures
●
Water or moisture cannot enter the chassis.
●
Air can flow freely around all sides of the chassis.
●
The vents on the sides of the chassis are not blocked.
●
6 Quick Start for Hardware Installation: Multilayer Stackable Switch
Table
Prepare these tools
Phillips head screwdriver
http://
1: