Step 2: Connecting To Ac Power - HP XB4000 User Manual

Step 2: Connecting to AC power

WARNING!
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the product by unplugging the power cord from the AC outlet.
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-
pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature. It is possible to receive an electric shock from a system
that is not properly grounded.
NOTE:
the connector that corresponds to the computer AC power adaptor being used.
Connect the docking station to an AC power source using the computer AC adapter and power cord:
1. Identify the correct power connector on the docking station.
NOTE:
NOTE:
2. Connect the computer AC adapter to the corresponding power connector on the docking station
(1).
3. Connect the AC power cord to the AC adapter (2).
4. Connect the AC power cord to the AC outlet (3).
10 Chapter 1 Getting started
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To reduce the risk of electric shock or damage to your equipment:
Both a Smart AC power connector and a standard AC power connector are provided. Choose
Power cords and AC outlets vary in appearance by region and country.
The AC adapter is included with the computer or purchased separately.
ENWW