Adjustment / Settings - Canon SELPHY DS810 Service Manual

3-3. Adjustment / Settings

As the following adjustments / settings (excluding user mode and service mode) for DS810 are the same as those for DS700,
see DS700 Service Manual for details as a reference.
For DS810, access cover gear phase adjustment and grease application on the access cover are not necessary.
(1) Paper feed motor adjustment
(2) Pump unit adjustment
(3) Grease application
(4) Waste ink counter setting
(5) User mode
Function
Nozzle check pattern printing
Print head cleaning
Print head deep cleaning
Print head alignment
Print head alignment values
printing
Language selection
Paper feed roller cleaning
Bottom plate cleaning
LCD viewer contrast adjustment
Print head friction prevention
Print head replacement
*1: Selectable from among the following 15 languages in the user mode (through operation panel buttons with the LCD monitor):
Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
*1 Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box -> each setting)
Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box -> each setting -
> other setting)
Paper thickness lever: right side ->
left side
Press and hold the Stop / Reset
button for more than two seconds at
the ink tank replacement position ->
moves to the print head replacement
position
LG = 01 Japanese
Procedures
Available through the printer driver
utility functions as well
Available through the printer driver
utility functions as well
Available through the printer driver
utility functions as well
Available through the printer driver
utility functions as well
Set several sheets of 4" x 6" sized paper
with the non-print side facing up.
Set Canon genuine paper MP-101 4" x
6", GP-401 4" x 6", or GP-501 4" x 6"
in the auto sheet feeder.
Remarks