Faq - Canon SELPHY DS810 Service Manual

The carriage
error due to the
mis-installed
print head
(5100)
5 B Operability
The bottom of
the printer gets
hot.
6 - Specifications
* Occurrence level:
A: The symptom is likely to occur frequently. (Caution required)
B: The symptom may occur under certain conditions, but likeliness is assumed very low in practical usage.
C: The symptom is unlikely to be recognized by the user, and no practical issues are assumed.
- When installing When the print
the print head head lock lever is
not pressed
(When replacing
completely into
the print head)
place at the print
head installation,
the print head lock
lever contacts with
the main cover,
due to its
incomplete
position. Which
causes the carriage
error, resulting in
the print head not
moving to the
center.
When Per the
continuously
specifications.
printing
In continuous
printing, the
bottom of the
printer becomes
hot, but
maintained within
the specified
range.
<Part 2: 4. FAQ>
When the print head cannot be
removed even after carrying out the
followings, repair is needed.
1) Disconnect the printer from a power
source with the printer powered on
when the carriage error is occurring.
2) Pull out the carriage and press the
print headlock lever in to fix it.
No specific solution.
- Error (5100)
occurred.
- Cyclical
blinking of
the Power
LED and
the Alarm
LED (2
times)
The bottom of
the printer
gets hot.
To the top