Adjustment / Settings - Canon iP2000 Simplified Service Manual

Hide thumbs Also See for iP2000:
Table of Contents

Advertisement

4. ADJUSTMENT / SETTINGS

4-1. User Mode
Function
Print head manual
cleaning
Print head deep
cleaning
Paper feed roller
cleaning
Bottom plate cleaning
(cleaning of ink mist
on the platen ribs)
Nozzle check pattern
printing
Print head alignment
<Standalone printer operation>
1)
Turn on the printer.
2)
Press and hold the Resume/Cancel button until the LED blinks the specified number of times
listed in the table below, and release it. The operation starts.
LED blinking
1 time
2 times
3 times
4 times
5 times
6 times
Procedures
- Cleaning both black and color:
See "Standalone printer operation" below.
- Cleaning black or color separately, or
both black and color:
Perform from the printer driver's
Maintenance tab.
- Cleaning black or color separately, or
both black and color:
Perform from the printer driver's
Maintenance tab.
1) Using the Paper Feed switch, select the
sheet feeder unit to perform paper feed
roller cleaning.
2) Remove all paper from the selected sheet
feeder unit.
3) Perform paper feed roller cleaning,
following the "Standalone printer
operation" procedures below.
1) Fold a sheet of plain paper (A4 or letter)
in half crosswise, then unfold and set it in
the ASF with the folded ridge facing
down.
2) Perform bottom plate cleaning, following
the "Standalone printer operation"
procedures below.
3) When the folded ridge of the ejected
paper is NOT soiled, cleaning is
completed. If it is soiled, repeat the steps
1) and 2).
See "Standalone printer operation" below.
1) Perform from the printer driver's
Maintenance tab.
2) According to the printout, set the optimum
values.
Operation
Print head manual cleaning
Nozzle check pattern printing
Paper feed roller cleaning
Unspecified
Bottom plate cleaning
Unspecified
If the paper feed roller cleaning is
not effective, manually clean the
rollers with a cloth slightly
dampened with water.
If soiling on the paper persists
after the bottom plate cleaning is
performed 3 times, manually
clean the platen ribs with a cotton
swab.
Also available from the printer
driver's Maintenance tab.
7
Remarks
Remarks

Advertisement

Table of Contents
loading

Table of Contents