Setting the greeting monitor function
You can choose if you hear the greeting message or not while monitoring
calls.
Press the STOP button until the
display shows "P".
lf you want to hear the greeting
message:
Press the 2WAY REC button until
"1 (ON)" is displayed.
lf you do not want to hear the
greeting message:
Press the 2WAY REC button until
"0 (OFF)" is displayed.
-Each time you press the 2WAY REC
button, "1 (ON)" or "0 (OFF)" will
change alternately.
-Wait for 7 seconds after setting.
Then the setting indicated on the
display is stored.
-To check the current setting, repeat
from step 1 lo 2.
- 1 9 -