Panasonic Easa-Phone KX-T5200 Operating Instructions Manual page 50

Automatic telephone answering system
Table of Contents

Advertisement

Note:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
Part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference in a residential
installation. This equipment
generates, uses, and can radiate
radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio
communications. However, there is
no guarantee that interference will
not occur in a oarticular installation. lf
this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving
antenna.
-lncrease the seoaration between
the equipment and receiver.
-Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
-Consult the dealer or an
experienced radio/TV technician
for help.
olf there is any trouble, disconnect
the unit from the telephone line and
connect a known working phone. lf
the known working phone operates
properly, have your unit repaired by
one of the specified Panasonic
Factory Service Centers. lf the
known working phone does not
operate properly, consult with your
telephone company.
.The unit should not be placed in
room where the temperature is less
than 5'C (41'F) or greater than
40"c (104'F).
oThe unit should be situated so that
the location or position does not
interfere with its proper ventilation.
Allow 10 cm (4") clearance around
the unit.
.When the unit is not used, turn the
power off. When left unused for
long periods of time, the unit should
be unplugged from the household
AC outlet.
.Do not place heavy objects on top
of this unit.
oPlace the unit on a flat level
surface. Damp basements should
also be avoided.
.Do not subject this unit to excessive
smoke, dust, mechanical vibration,
shock, or direct sunlight.
- 5 0 -

Advertisement

Table of Contents
loading

Table of Contents