Motorola MVME956AC User Manual page 27

5. Secure the chassis using the rear mounting bracket supplied.
6. Reinstall the front bezel by aligning the pop-on/off catches on the
7. Reconnect the power cable and power-on the system.
Implementation of this procedure may invalidate product
!
safety (e.g., UL, CSA, etc.) and RFI regulatory compliance
(FCC, VDE).
Caution
http://www.mcg.mot.com/literature
back of the bezel with the ball studs on the front panel of the chassis.
Press firmly into place.
Chassis Installation Instructions
2
2-5