Removal and Replacement Procedures
Optional Air Filter Kit
Replacement
5
5-14
If you are using the optional air filter (MVME946AFO) and wish to
replace it, refer to
Related Documentation
the Air Filter Kit.
1. Attach the new fan to the fan tray with the screws removed in
9
above.
2. Plug the appropriate fan wire connector into its mating connector.
3. Rotate the fan tray and air filter door back into place and secure
them with the screws removed in
procedure. Set the unit upright if it is not mounted in a rack.
4. Reinstall the front bezel.
5. Slide the MVME956AC chassis back into its rack mounting or
reinstall the top panel and side panels on your lab benchtop unit.
on page 1-10 for information on
Step 4
and
Step 6
Computer Group Literature Center Web Site
Step
of the removal