Hardware Preparation
There are a number of items to check or tasks to perform before you apply
power to the chassis. These items include, but are not limited to, the items
summarized in the following table.
Item
VME bus backplane jumpers
Install modules
Install cables (as required)
Chassis rack mounting
Jumper options on modules used in
this chassis (as required)
For peripheral drives: Select
jumper options on disk drive(s)
http://www.mcg.mot.com/literature
Table 1-3. Hardware Preparation Items
Hardware Preparation
Location of Instructions
Chapter 4
of this manual
User's manual(s) for the respective
module(s)
MVME956AC installation
instructions, also other user's
manual(s) as applicable
Chapter 2
of this manual
User's manual(s) for the respective
module(s)
System manual, kit instructions
1
1-9