Code Alarm Professional 1000 Owner's Manual page 7

,
"
,
'
SYSTEM MAINTENANCE/SERVICE
The system requires no specific maintenance, YourCode-Alarmdealeris fully
qualified to properly seNice all system components should a problem arise.
The life expectancy of the transmitter battery is approximately 1 year
may be longer depending on actual use. Decreasing transmitter range i
an indication of a weakening battery. To access the transmitter battery;
1 . Use a small phillips head screwdriver to remove the case screVf on the
back of the transmitter. 2. Remove the back cover to access the battery.
3, Carefully remove the battery and replace It with a 12V cigarette lighter
battery (Duracell-Type MN21, Gold Peak-Type GP23A or order from your
dealer). Make sure the battery's (-)
&
(+)
sides are placed into transmitter
properly.
During ideal conditions your CODE ALARM security system is designed to
operate via remote control at a range of approximately 50 feet from your
vehicle. Although you may at times experience range greater than 50 feet,
are certain conditions that will cause the transmitter range to be less
what you would normally experience, Atmospheric conditions and
radio interference are just a few examples of the types of interference that
can reduce transmitter range, If you experience conditions which will not
allow your transmitter to disarm your vehicie, then use your emergency
override button inside the vehicle. This will disarm the system and allow you
start your vehicle. Move your vehicie to a different location, If problem
occurring, check your transmitter battery or see your dealer,