Code Alarm Professional 1000 Owner's Manual page 5

,
-.
,.
IB:If...u;~~lE!~~~ttt When you disarm your system, the siren will
emit a series of" Chirps", if the alarm was tripped in your absence. To
identify what tripped your system push the emergency override button
before turning the ignition on.
1 CHIRP - Shock Sensor was tripped.
2 CHIRPS - Ignition has been turned "ON".
3 CHIRPS - Door Sensor was triggered (Ford vehicles only)
4 CHIRPS - Door Sensor was triggered (G. M" Chrysler. Import vehicles) or
Hood/Trunk was triggered.
SCAN PETERRENT:
This alarm is designed to prevent any attempt
by a thief to disarm your system by electronically scanning your per-
sonal transmitter code.
COPE LEARNING:
Dealer can program system on the spot to learn
up to four new transmitter codes should origircal transmitter be lost or
stolen. Since new codes do not have to be specially ordered, your
vehicle will not go unprotected.
AUTOMATIC REARM AFTER TRIP CYCLE:
If alarm is tripped, siren
sounds for 60 seconds, then siren stops and system rearms itself. If a thief
returns to try again, he returns to an armed vehicle.'
CONTINUOUS OPEN POOR MONITOR:
If a potential thief
attempts a break-in and leaves the vehicle door ajar, alarm sounds for
one minute, then turns off. This cycle is repeated five times to draw'extra
attention to the vehicle while keeping the vehicle armed and al'ert.