Deluxe vehicle security and remote code alarm start system with two way confirming lcd remote control (14 pages)
Summary of Contents for Code Alarm PowerCode PC 6100
Page 1
Remote Vehicle Control System PC 6100 Owner's Manual Keyless Entry and Convenience System IMPORTANT NOTE: The operation of the Power Code as described in this manual is applicable to most vehicles. However, due to the engine type and configuration of some vehicles (i.e. diesel engines), some functions 101512-2 AND/OR SAFETY PRECAUTIONS may not apply.
Table of Contents Features and Benefits of the PowerCode PC 6100 ..... Using Your Remote Transmitter ..........4 Locking the Vehicle Doors Unlocking the Vehicle Doors Two-Stage Door Unlock Activating the Trunk Release Feature Using the Car Finder Feature Personal Protection Alarm (Panic) Automatic Convenience Options ..........
Features and Benefits of the PowerCode PC 6100 Two Easy-to-Use Weather-Resistant Remote Controls The remote controls included with the Power Code PC 6100 utilize durable, moisture resistant cases and sealed rubber buttons for reliability and long life. Rolling code technology prevents the transmitter signals from being duplicated.
Using Your Remote Transmitter Press to LOCK the Vehicle Doors* Press and hold for auxiliary function Press for Car Finder Press to UNLOCK Press and hold for Vehicle Doors Panic Alarm Press and hold to open trunk Press for two-car operation (SHIFT) Locking the Vehicle Doors To lock the vehicle doors, exit the vehicle, close all doors, then press*...
Using Your Remote Transmitter (cont.) Two-Stage Door Unlock If this feature is enabled on your system, pressing UNLOCK one time will unlock only the driver’s door. Press UNLOCK again within 1 minute to unlock all doors. Activating the Trunk Release Feature Press and hold TRUNK to open the vehicle trunk or hatch (if equipped and connected).
Automatic Convenience Options The Power Code PC 6100 performs a variety of automatic functions to enhance security and comfort. Some of these features are programmable at the time of installation. Please see your installer for further details. Illuminated Entry When the alarm system is disarmed, the vehicle courtesy lights will turn on for 1 minute, or until the vehicle is started or the system is re-armed.
System Maintenance Adding Remote Controls to Your System The Power Code PC 6100 has the ability to operate from up to four (4) remote controls. Follow these instructions to add a remote control to your system. Make sure the system is disarmed and the ignition is off. Open the driver’s door.
Emergency Disarm Procedure If your remote control is lost or fails to function, use this procedure to disarm the Power Code PC 6100 and start your vehicle. 1. Use the keys to enter the vehicle. The alarm will sound once the door is opened. 2.
Page 9
CODE Systems, INC. LIMITED LIFETIME WARRANTY A CODESystems, INC. (“CODE”) vehicle security system sold to a retail consumer purchaser by an authorized dealer of CODE and installed by an authorized dealer of CODE is warranted by CODE to the original retail consumer purchaser to be free from defects in workmanship and materials for the lifetime of the vehicle in which the security system was originally installed.
Page 10
Notes: FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference that may cause undesired operation.
Need help?
Do you have a question about the PowerCode PC 6100 and is the answer not in the manual?
Questions and answers