HP MINI 5103 Maintenance And Service Manual page 76

4. To replace the display bezel:
a. Remove the 4 Mylar screw covers (1) from the corners of the display bezel, and then
remove the 4 2.5×3.0 screws (2) that secure the display bezel to the back cover.
b. Flex the inside edges of the left and right sides (1), and then the top and bottom (2) of the
display bezel until the bezel disengages from the display enclosure.
c. Remove the display bezel (3).
NOTE:
5. To replace the webcam module:
a. Lift the webcam (1).
68 Chapter 4 Removal and replacement procedures
Tabs on the hinge covers (4) lock to insets on the base enclosure.