Mass Storage Devices - HP MINI 5103 Maintenance And Service Manual

Mass storage devices

NOTE: Each hard drive spare part kit and solid state drive spare part kit includes a bracket and
screws.
Description
Hard drive, 320-GB, 7200-RPM, for use with WWAN option
Hard drive, 320-GB, 7200-RPM, SATA
Hard drive, 250-GB, 7200-RPM, for use with WWAN option
Hard drive, 250-GB, 7200-RPM, SATA
Hard drive, 160-GB, 7200-RPM, for use with WWAN option
Hard drive, 160-GB, 7200-RPM, SATA
Solid state drive, 128-GB, SATA
Solid state drive, 80-GB, SATA
Before removing the hard drive or solid state drive:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the
device on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first disconnecting the power cord from the AC outlet
and then disconnecting the AC adapter from the device.
4. Remove the battery (see
5. If your device has WWAN capability, remove the SIM (see
6. Remove the keyboard (see
To remove the hard drive or the solid state drive:
1. Loosen the Phillips PM2.5×10.0 captive screw (1), and remove the 2 Phillips PM2.0×3.0
screws (2) that secure the drive assembly to the base enclosure.
50 Chapter 4 Removal and replacement procedures
Battery on page 38).
Keyboard on page 43).
Spare part number
593643-001
577974-001
593642-001
538972-001
593641-001
577972-001
606971-001
583004-001
SIM on page 39).