Rtc Battery - HP MINI 5103 Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the real-time clock (RTC) battery:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the
device on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first disconnecting the power cord from the AC outlet
and then disconnecting the AC adapter from the device.
4. Remove the battery (see
5. If your device has WWAN capability, remove the SIM (see
6. Remove the Keyboard (see
7. Remove the Hard drive (see
8. Remove the Top cover (see
Remove the RTC battery:
1. Disconnect the RTC battery cable (1) from the system board.
2. Detach the RTC battery (2) from the system board.
NOTE:
Reverse this procedure to install the RTC battery.
62 Chapter 4 Removal and replacement procedures
Battery on page
Keyboard on page
Mass storage devices on page
Top cover on page
The RTC battery is attached to the system board with double-sided tape.
38).
SIM on page
43).
50).
56).
Spare part number
507707-001
39).