Computer Setup In Suse Linux; Starting Computer Setup; Computer Setup Menus; File Menu - HP MINI 5103 Maintenance And Service Manual

Computer Setup in SUSE Linux

Starting Computer Setup

Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating
system is not working or will not load.
NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your
computer.
NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB
legacy support is enabled.
To start Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press
Menu" message is displayed in the lower-left corner of the screen.
2. Press

Computer Setup menus

The menu tables in this section provide an overview of the Computer Setup options.
NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by
your computer.

File menu

Select
System information
Set system date and time
System Diagnostics
Restore defaults
Reset BIOS security to factory default
94 Chapter 5 Computer Setup
f10 to enter BIOS Setup.
esc while the "Press the ESC key for Startup
To do this
● View identification information for the computer.
●
View specification information for the processor, cache
and memory size, and system ROM.
Change date and time
● Set date—MM:DD:YYYY
●
Set time—HH:MM
●
F1—System information
●
F2—Start-up test
● F3—Run-in test
●
F4—Hard disk test
Replace the configuration settings in Computer Setup with
the original factory settings. (Password settings and security
settings are not changed when you restore the factory
settings.)
Restore the BIOS security settings to the factory default.