Switching To Standby; Switching Off; Input Connections; Input Module Insertion Into The Projector - Barco R9001180 Owner's Manual

Connections
Lamp run time is 750 hours. Operating the lamp longer than 750 hours may damage the
projector. Please replace the lamp.
Warning : Using a lamp for more than 750 hours is dangerous, the
lamp could explode.
Switching to stand-by.

Input connections.

Input module insertion into the projector :

Switching off

STANDBY
Lamp run time
720 h
WARNING
Lamp run time is 750 hours
Operating the lamp longer
than 750 hours may damage
the projector.
Please replace the lamp
<ENTER> to continue