Chapter 2. Connecting The Router; System Requirements; Installation Environment Requirements; Connecting The Router - TP-Link TL-MR3020 User Manual

Chapter 2. Connecting the Router

2.1 System Requirements

3G/4G Mobile Broadband Internet Access Service (With a LTE /HSPA+ /HSUPA /HSDPA
/UMTS /EVDO USB dongle)
PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors
TCP/IP protocol on each PC
Web browser, such as Microsoft Internet Explorer 5.0 , Netscape Navigator 6.0 or above

2.2 Installation Environment Requirements

Place the Router in a well ventilated place far from any heater or heating vent
Avoid direct irradiation of any strong light (such as sunlight)
Keep at least 2 inches (5 cm) of clear space around the Router
Operating Temperature: 0 ~40
Operating Humidity: 10%~90%RH, Non-condensing

2.3 Connecting the Router

The Router supports three modes, 3G/4G router mode, WISP mode and AP mode. You can
deploy the mode appropriate to your actual network environment. To connect the Router, please
take the following steps for different modes.
a. 3G/4G Router Mode
In 3G/4G router mode, with a 3G/4G modem/card, this Router can join a 3G/4G network as well
as act as a wireless central hub to broadcast its SSID. Thus, the other wireless devices can
connect to the Router so as to join the same 3G/4G network.
TL-MR3020
℃ ℃ (32 ~104 ) ℃ ℃
-6-
Portable 3G/4G Wireless N Router