Network; Internet Access - TP-Link TL-MR3020 User Manual

Note:
The default PIN code of the Router can be found in its label or the WPS configuration screen as
Figure 4-2.
c). You will see the following screen when the new device successfully connected to the

network.

Note:
1) The status LED on the Router will light green all the time if the device has been
successfully added to the network.
2) The WPS function cannot be configured if the Wireless Function of the Router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.
4.5 Network
Figure 4-4 the Network menu
There are five submenus under the Network menu (shown in Figure 4-4): Internet Access,
3G/4G, WAN, MAC Clone and LAN. Click any of them, and you will be able to configure the
corresponding function.
4.5.1

Internet Access

Choose menu "Network→Internet Access", you can configure the access mode on the screen
below. The router is designed to work with either WAN port or 3G/4G USB modem, and
supports automatically take over back up with 3G/4G access as Ethernet WAN failover.
TL-MR3020 Portable 3G/4G Wireless N Router
-35-