Dhcp; Dhcp Settings - TP-Link TL-MR3020 User Manual

MAC Address - The connected wireless station's MAC address
Current Status - The connected wireless station's running status, one of STA-AUTH /
STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP /
AP-DOWN / Disconnected
Received Packets - Packets received by the station
Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go
to the next page and click the Previous button to return the previous page.
Note:
This page will be refreshed automatically every 5 seconds.

4.7 DHCP

Figure 4-32 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-32 ): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function.
4.7.1

DHCP Settings

Choose menu "DHCP→DHCP Settings", you can configure the DHCP Server on the page
(shown in Figure 4-33 ).The Router is set up by default as a DHCP (Dynamic Host Configuration
Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to
the Router on the LAN.
TL-MR3020 Portable 3G/4G Wireless N Router
-62-