Using The Accessories - AEG BS9304001 User Manual

You can overwrite a memory position. Refer to section „Storing a programme". At step 4
use the shuttle to overwrite an existing programme.
You can change the name of a programme in the menu "Edit Programme Name".
Activating the programme
1. Activate the appliance.
2. Select the Favourite Programme menu. Press OK to confirm.
Select your favourite programme name. Press OK to confirm.
3.
Press to go to Favourite Programme directly, also from the off state.

USING THE ACCESSORIES

WARNING!
Refer to "Safety information" chapter.
Core temperature sensor
The core temperature sensor measures the core temperature of the meat. When the meat
reaches the set temperature, the appliance deactivates automatically.
You have to set:
• The appliance temperature
• The core temperature
Use only original parts. It ensures the best cooking result.
Using the core temperature sensor:
1. Put the tip of the core temperature sensor into the centre of the meat.
2. Activate the appliance.
3. Put the plug of the core temperature sensor into the socket on the right-upper side of
the cavity front.
The display shows the core temperature sensor.
4. Use the shuttle in less than 5 seconds to set the core temperature.
5. Set the heating function and, if necessary, the temperature.
The appliance calculates an approximate end time. The end time varies for different
quantities of food, the set temperatures (minimum 120°C) and the operating modes.
The appliance calculates the end time in approximately 30 minutes.
The core temperature sensor must stay in the meat and in the socket during the cooking
process.
6. When the meat reaches the set core temperature, an acoustic signal sounds. The appli-
ance deactivates automatically.
Use any key to stop the signal.
Using the accessories
19