Clock Functions - AEG BS9304001 User Manual

16

Clock functions

Energy saving
The appliance has some features that help you save energy during everyday cooking:
• Residual heat:
– the heating function or programme operates: the heating elements are deactivated
10% time earlier (the lamp and fan continue to operate). The condition: the cooking
time is longer than 30 minutes or you use the clock functions (Duration, End Time).
– the appliance is deactivated: you can use the heat to keep the food warm. The display
shows the remaining temperature, the bars show the decreasing temperature.
• Deactivate the lamp - touch and hold
cooking.
• Eco functions - refer to section "Heating Functions" (for selected models only).
CLOCK FUNCTIONS
Timer functions
Symbol
You can use Duration and End Time at the same time, if you want to automatically activate
and deactivate the appliance on a given time later.
If you set the time for a clock function, the time starts to count down after 5 seconds.
If you use the clock functions Duration and End Time, the appliance deactivates the heating
elements after 90% of the set time. The appliance uses the residual heat to continue the
cooking process until the time ends (3-20 minutes).
Setting the Duration and End Time
1. Set the heating function.
2. Press
related symbol.
Use the shuttle to set the necessary time. Press OK to confirm.
3.
After 90% of the set time, an acoustic signal sounds. The appliance deactivates. The
display shows a message.
4. Press a sensor field or open the door to stop the signal.
With Duration and End Time the appliance deactivates automatically.
Function
To set a countdown (max 2 hours 30 minutes). This function has
no effect on the operation of the appliance. You can also acti-
Minute Minder
vate it in off state. Use
shuttle to set the minutes and OK to start.
To set how long the appliance has to be in operation (max. 23 h
Duration
59 min).
To set the switch-off time for an heating function (max. 23 h
End Time
59 min).
again and again until the display shows the necessary clock function and the
for 3 seconds to deactivate the lamp during
Description
to activate the function. Use the