Call Forwarding - THOMSON TG797 Setup And User Manual

5 Telephony
Activating services on the web pages
To activate/deactivate supplementary services via the web page:
1 Browse to the
2 On the Toolbox menu, click Telephony.
3 In the Location
4 In the Pick a task list, click View Telephony Services.
5 In the Location
6 To activate/ deactivate supplementary services select/clear the check box of the supplementary service.
7 Click Apply.

Call Forwarding

Call Forwarding informs you about the call forwarding parameters:
CFNR-timer or Call Forwarding on No Reply timer is the time expressed in seconds after which an
incoming call is forwarded when not answered.
CFNR-destination or Call Forwarding on No Reply destination is the telephone number to which a call is
forwarded when the CFNR-timer expires.
CFU-destination or Call Forwarding Unconditional is the telephone number to which an incoming call is
always forwarded.
CFBS-destination or Call Forwarding on Busy Subscriber is the telephone number to which an incoming
call is forwarded when your telephone is busy.
Using switching order commands
In order to use switching order commands (R or hook flash followed by a digit), certain supplementary
services have to be activated.
The following list gives an overview of the supplementary services that have to be activated in order to use
switching order commands (SOC):
Hold
Activate
Action
To put an active call on hold and enable a
call set up (the dial tone is generated)
To terminate the call on hold
To terminate an active call and switch to
the call on hold
38
Thomson Gateway Web Interface.
bar, click Configure.
bar, click Configure.
when you want to
Press Illustration
R, 2
B C
active
A
R, 0
B C
active on hold
A
R, 1
B C
active on hold
A
B C
A presses
R2
on hold
dial tone
A
B C
A presses
R0
active
A
B C
A presses
R1
active
A
E-DOC-CTC-20080421-0018 v1.0