Printer Language; Resource Save; Toner Alarm - IBM Infoprint 1125 User Reference

Printer Language

Purpose:
To establish the default printer language used to communicate data from the computer to the printer.
Values:
PCL Emulation*
PS Emulation

Resource Save

Purpose:
To determine what the printer does with downloaded resources, such as fonts and macros stored in
RAM, if the printer receives a job that requires more memory than is available.
Values:
Off*
On

Toner Alarm

Purpose:
To specify how the printer responds when it is out of toner.
Values:
Off*
Single
Continuous
See also:
Auto Continue
Argecy Computer Corporation 248-324-1800
PCL emulation, compatible with Hewlett-Packard printers.
PostScript emulation, compatible with Adobe PostScript language.
Note: Setting a printer language as the default does not prevent a software application
from sending print jobs that use the other language.
Printer retains downloaded resources only until memory is needed. It then deletes those
resources associated with the inactive printer language.
Printer retains all downloaded resources for all printer languages during language changes
and printer resets. If the printer runs out of memory, 38 Memory Full is displayed.
An error message is displayed until someone replaces the toner cartridge. If an
Auto Continue value is selected from the Setup Menu, the printer resumes printing
after the specified timeout value.
Printer stops printing, displays an error message, and sounds three quick beeps.
Printer stops printing, displays an error message, and repeats three beeps every 10
seconds until the toner cartridge is replaced.
168