IBM Infoprint 1125 User Reference page 79

Problem
Characters have jagged or
uneven edges.
Image quality is poor.
Part or all of the page is
printed in black.
The job prints, but the top and
side margins are incorrect.
Argecy Computer Corporation 248-324-1800
Action
• Change the Print Resolution
dpi.
• Turn PQET in the Quality Menu to On.
• If you are using downloaded fonts, verify that the fonts are supported by the
printer, the host computer, and the software application.
Resolution was automatically reduced. Reduce the complexity of the print job or
add additional printer memory. See
• Check the print cartridge to see if it is installed correctly.
• If the charge roll has been replaced, verify that it is installed correctly.
Paper Size
• Make sure the
• Make sure the margins are set correctly in your software application.
76
setting in the Quality Menu to 600 dpi or 1200
Res Reduced.
setting in the Paper Menu is correct.