Using The Operator Panel Buttons - IBM Infoprint 1125 User Reference

Using the operator panel buttons

Use the five operator panel buttons to open a menu, scroll through a list of values, change printer
settings, and respond to printer messages.
The numbers 1 through 6 appear beside the operator panel buttons; these numbers are used to enter
personal identification numbers (PIN) for Print and Hold jobs. For more information, see
Print and Hold
The following information describes the functions of each button.
Go
Menu
Select
Return
Stop
Argecy Computer Corporation 248-324-1800
function.
Note: Buttons act upon the information displayed on the second line of the operator
panel.
Press the button to:
Go
• Return to the Ready state if the printer is in an offline situation (the Ready
message does not appear on the display).
• Exit printer menus and return to the Ready state.
• Clear operator panel error messages.
If you've changed printer settings from the operator panel menus, press
before sending a job to print. The printer must display Ready for jobs to print.
Each end of the button has a function. Press
• When Ready is displayed, to take the printer offline (out of the Ready state)
and scroll through the menus.
• When is displa
Busy
• yed, to take the printer to the Job Menu.
• When the printer is offline, press
– Press to go to the previous item in the menus.
<Menu
For menu items with numeric values, such as Copies, press and hold Menu to
scroll through the values. Release the button when the number you want is
displayed.
Press to:
Select
• Select the menu displayed on the second line of the display. Depending on
the type of menu, this action:
– Opens the menu and shows the first item in the menu.
– Opens the menu item and shows the default setting.
• Save the displayed menu item as the default setting. The printer shows the
Saved message and returns to the menu item.
• Clear certain messages from the operator panel.
Press Return to return to the previous menu level or menu item.
Press at the Ready, Busy, or Waiting message to temporarily stop all
Stop
activity and take the printer offline. The operator panel status message changes
to Not Ready.
Press to return the printer to the
Go
:
Menu
to scroll through the menus.
Menu>
Ready, Busy, or Waiting s
9
Using the
Go
tate.