Chapter 34: Infrared Menu - IBM Infoprint 1125 User Reference

34
Use the Infrared Menu to change printer settings affecting jobs sent to the printer through an infrared
port.
Select a menu item for more details:
• Infrared Buffer
• Infrared Port
• Job Buffering
• Max Baud Rate
• NPA Mode
Infrared Buffer
Purpose:
To configure the size of the infrared input buffer.
Values:
Disabled
Auto*
5K to maximum
size allowed
See also:
Resource Save
Argecy Computer Corporation 248-324-1800
Infrared Menu
Note: Values marked by an asterisk are the factory default settings.
Disables the infrared buffer.
Printer automatically calculates the Infrared Buffer size (recommended
setting).
User specifies the Infrared Buffer size. The maximum size setting depends on
the amount of memory in your printer, the size of the other link buffers, and
whether Resource Save is set to On or Off. To maximize the range for the
Infrared Buffer size, disable or reduce the size of the parallel, serial, network,
LocalTalk, and USB buffers.
Note: Changing the Infrared Buffer menu item automatically resets the printer.
• PCL SmartSwitch
• PS SmartSwitch
• Transmit Delay
• Window Size
122