Technicolor TG587n v3 Setup And User Manual page 56

7 SHARING CONTENT ON YOUR TECHNICOLOR GATEWAY
Configuration
All servers are enabled by default. The only thing that you need to do is to plug your USB memory stick or external hard
disk in (one of) the USB port(s) of your Technicolor Gateway.
By using a USB hub, you can connect up to five USB mass storage devices to the Technicolor Gateway.
Do not remove your USB storage device without stopping it first, otherwise data might be lost! For more
information, see
50
"7.5 Safely Removing your USB Storage Device" on page 62.
DMS-CTC-20101206-0017 v1.0