Electrolux Iron AidTM EDI97170W User Manual page 9

max
4. Push filler neck and drawer with con-
densed water container back in.
When dry, all textiles not specifically prohibi-
ted in the chapter 'Sorting and preparing
laundry' may be treated with the Iron Aid
Steam System. Wet textiles may only be trea-
ted if they are labelled as suitable for dry pro-
grammes.
Water recirculation system
This system allows you to use for a Iron Aid
Steam cycle automatically the condensed
water collected in the condense water tank
during a drying cycle.
Caution! The water in the condense
water tank will never automatically fill the
steam water tank. The water
recirculation system works only if it is
supplied by water arising during
standard drying cycles.
To activate this system turn the valve in ON
position. When the valve is ON the steam
water tank will be filled during the next drying
cycle. Water will be supplied by the water
circuit directly to the steam water tank filling
it automatically.
Overview of Iron Aid programmes
Programmes
COTTON
SYNTHETICS
Additional
functions / op-
tions
1.0 kg • •
1.0 kg • •
To activate recirculation set valve in ON po-
sition. To do that:
1. Pull drawer containing condensed water
container out a little (1). Behind the draw-
er there is water tank's filler neck (2).
2
2. Turn the valve in ON position. Water will
be supplied by the water circuit directly to
the steam water tank filling it automati-
cally during the next drying cycle.
The steam water tank is empty. Please fill it
and then press START/PAUSE
If valve is closed (OFF position) recircu-
lation system does not work.
Application/properties
For 1- 6 cotton shirts. Min. 80% natural
fibres (cotton, linen etc).
For 1- 6 synthetic shirts. Max. 20% nat-
ural fibres (cotton, linen etc).
electrolux 9
1
wet,
dry
wet,
dry