Service - Electrolux Iron AidTM EDI97170W User Manual

26 electrolux
the other side having rotated the block
through 180°.
5. Unscrew hinge A from the loading door,
rotate through 180°, re-insert on the op-
posite side and screw down.
6. Re-insert cover plates B on the opposite
site having first rotated them through
180°.
7. Unscrew cover plates D from the front of
the machine, rotate through 180°, screw
on the opposite side.
8. Unscrew door lock E, push down slightly
and remove from the front of the ma-
chine.
9. Press snap-in button F in and down,
press cover down slightly and remove
from front of the machine.
10. Change door lock E over to the opposite
side, screw down the door interlock.
E
F
E
F

Service

In the event of technical faults, please first
check whether you can remedy the problem
yourself with the help of the operating in-
structions - see chapter What to do if....
If you were not able to remedy the problem
yourself, please contact the Customer Care
Department or one of our service partners.
In order to be able to assist you quickly, we
require the following information:
– Model description
– Product number (PNC)
G
G
11. On the other side, insert cover F and al-
low snap-in button to lock into place.
12. Insert loading door and hinges into re-
cesses on the front of the machine and
screw down.
Note regarding contact protection: The
machine is only secure for operations again
once all plastic parts have been inserted.
Special accessories
The following special accessories are availa-
ble from your Electrolux Service Force Centre
or your specialist dealer:
Intermediate installation kits for stacked
washer and iron aid appliance:
These intermediate installation kits can be
used to arrange the iron aid appliance and an
automatic Electrolux washing machine
(60cm wide, front loading) as a space-saving
washer/iron aid stack. The automatic wash-
ing machine is at the bottom and the iron aid
appliance is at the top. Two versions can be
supplied:
• without stacker plate
• with extractable stacker plate
Read the manual supplied with the installa-
tion kit carefully.
– Serial number (S No. is on rating plate stuck
to the product - to find it see chapter Product
description))
– Type of fault
– Any error messages displayed by the ap-
pliance
So that you have the necessary reference
numbers from your appliance at hand, we
recommend that you write them in here:
Model descrip-
tion: