Iron Aidtm Steam System - Electrolux Iron AidTM EDI97170W User Manual

8 electrolux
TM
Iron Aid Steam System
Fill water tank
You must fill up the water tank before using
an Iron Aid programme for the first time. Use
the distilled water provided if there is not yet
any condensed water from previous drying
programmes (see chapter on "Cleaning and
Maintenance, Emptying condensed water
container"). If, after an Iron Aid programme is
selected, the water tank indicator on the
display lights up, you will need to fill up the
water tank with distilled water. Otherwise,
you will not be able to start any Iron Aid pro-
gramme.
Caution! Important! Only fill the water
tank with distilled or fully desalinated
water. Do not use tap water or additives!
You can also use the condensed water
from the tank, as long as you filter it first
(use the canister supplied with the filter
fitted: see figure opposite).
1. Pull drawer containing condensed water
container out a little (1),
2. Load your laundry (do not force it in/ over-
load the machine).
Caution! Caution! Be careful not to trap
laundry in between the loading door and
rubber seal.
3. Close loading door securely. Lock must
audibly lock.
2. Push down the water tank's filler neck (1)
and pull out it (2).
1
3. Fill with distilled water from the canister
provided, up to the MAX mark inside the
container.
1
2