Handset Display - Lucent Technologies MDW 9031 Quick Reference

Quick Reference

Handset Display

1
2
Information you would see on a wired system phone's display, (except
1
time), based on your communications system:
LCL:P, D, M1, or M2 = Local Mode:
communications system
WIRELESS TEST = Handset in Wireless Test Mode
VIBR = Vibrator enabled
PSEL = Line Preselection enabled
PRESELECTION:ON/OFF = Line Preselection Mode:status
CHANGE BUTTN MAP = Communications system setting is
wrong
MAP:P, D, M1, M2 = Button Mapping Mode: setting
NO LINK = Handset is not communicating with radio module
2 MSG indicates that you have a message.
RANGE indicates that the handset is out of range or almost out of range.
3
Handset also beeps.
ON indicates that handset was turned on by pressing O.
4
5 Battery icon flashes to indicate a low battery condition. Handset also
emits 2 beeps.
No Ring icon indicates that the alerter is disabled.
6
MUTE indicates that handset microphone was turned off by pressing
7
M.
MDW 9031/9031DCP Wireless Pocket Phone Quick Reference
2 Issue 2 February 1999
3
8
4 5 6
7
9
503-801-165