Changing Settings Or Performing Tests In Local Mode - Lucent Technologies MDW 9031 Quick Reference

Wireless pocket phone

Hide thumbs Also See for MDW 9031:

Table of Contents

Quick Reference

Changing Settings or Performing Tests in Local Mode

Make sure the handset is turned off.

Press and hold " for 3 seconds.

While still holding " , press O.

Press one of the following:

A (2) to enable or disable the alerter.

L (5) to enable or disable backlighting.

P (7) for 3 seconds, then " to enable or disable

Line Preselection.

V (8) to enable or disable the vibrator.

W (9) to enter Wireless Test Mode, then 1 for signal strength 2

for voice quality 3 for matching radio module and slot number 5

for handset power settings # to enter Local Test Mode.

Press O to exit.

CAUTION:

The MDW 9031/9031DCP handset is a radio device and, like all radio

devices, should not be placed next to a pacemaker. See "Guidelines

for Safe and Efficient Operation" in the MDW 9031/9031DCP Wireless

Pocket Phone Installation and Use guide for more information.

MDW 9031/9031DCP Wireless Pocket Phone Quick Reference

Issue 2 February 1999

503-801-165

Table of Contents