Sommaire The WT9001 cordless phone Before using the cordless phone Charge (or recharge) the battery pack ......7 Register the cordless phone .
Page 3
Sommaire Customizing the WT9001 Select a personalized ring signal (telephone feature) ....16 Adjust the ringer volume (telephone feature) ..... . . 16 Activate (deactivate) the audible button stroke (telephone feature) .
Page 4
Sommaire System features available at the administrator phone Set the date and time (system feature) ......35 Delete the cordless phone PINs (system feature) .
The WT9001 cordless phone The WT9001 cordless phone 1. Earpiece 2. Interactive display: allows selection and access to features and provides message information. The first line shows the available features. The second line shows information. 3. STOP button: used to quit a menu and get back to the previous one.
Page 6
The WT9001 cordless phone 7. Dial pad: - used to dial telephone or extension numbers in numeric mode, - used to enter letters and punctuation marks in alphabetical mode. Table showing the available characters TELEPHONE MENU SYSTEM MENU 1üéâäàåêëèïîìÄÅÉæÆôöòûùÖÜ .:?1...
You must perform the following operations before attempting to use the WT9001 cordless phone. Charge (or recharge) the battery pack The WT9001 cordless phone is supplied with a rechargeable battery pack and charger unit. To charge the battery pack: •...
First call First call Call an extension • Press the ON/OFF HOOK button. • Dial the extension number. Call the attendant • Press the ON/OFF HOOK button. • Dial the Attendant access code (9). Place an automatic callback (to a cordless phone only) If the extension you are calling is busy or unanswered, you may automatically place another call to the extension.
First call Use the DECT 12 directory (system feature) To place a call to an outside party whose telephone number is stored in the DECT 12 direc- tory, you may key in a name. • Press the ON/OFF HOOK button. •...
First call Send a message to an outside party (ISDN service) When the outside number you are calling is busy or unanswered, you may send one of the following: PLEASE CALL ME BACK SOON, PLEASE CALL BACK TOMORROW, I WILL CALL BACK LATER, I WILL CALL BACK TOMORROW or DATE FOR MEETING OK.
First call Answer a call • Press the ON/OFF HOOK button or remove the cordless phone from the charger unit. Note: When receiving a trunk call, the display shows either the calling party’s name (if stored into the DECT 12 direc- tory) or the calling party’s number (caller identification sent by the network) or the message “TEL NO UNKNOWN”.
With a call in progress With a call in progress Place a call on hold (ISDN service) You may place a call on hold anytime you have to interrupt the conversation to answer another call, place a new call or perform some other task. You have to place the call on hold before transferring it.
With a call in progress Store a telephone number in temporary memory (system feature) While conversing, you may store your caller’s telephone number in order to call him/her back later. • Press the Previous or Next button to select the «Note» feature. •...
With a call in progress Copy the number stored in temporary memory to the DECT 12 directory • Press the ON/OFF HOOK button. • Press the Previous or Next button to select the «Note» feature. • Press the OK button. PLEASE DIAL ENTER NOTEPAD >Note...
With a call in progress To refuse the new call • Press the Previous or Next button to select the «Reject» feature. • Press the OK button to confirm. You are still connected to the current call and your sec- ond caller hears the busy tone.
Customizing the WT9001 Customizing the WT9001 Select a personalized ring signal (telephone feature) You may choose your own personalized ring signal for your cordless phone from ten different possibilities. • Press the Menu button. • Press the Previous or Next button to select the «VOLUME/MELODY» feature.
Customizing the WT9001 Activate (deactivate) the audible button stroke (telephone feature) • Press the Menu button. • Press the Previous or Next button to select the «SET UP» feature. MENU: SET UP <> <> • Press the OK button. •...
Customizing the WT9001 Modifying numbers stored in the DECT 12 directory • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «PROGRAM AD» feature.
Customizing the WT9001 Storing numbers in your personal directory (telephone feature) You may store up to twenty names and numbers in the your personal AD memories. • Press the Menu button. • Press the Previous or Next button to select the «EDIT NAME/NR» feature.
Customizing the WT9001 Deleting numbers stored in your personal directory • Press the Menu button. • Press the Previous or Next button to select the «EDIT NAME/NR» feature. MENU: EDIT NAME/NR <> <> • Press the OK button. • Press the Previous or Next button to select the «DEL. NAME/NR»...
Customizing the WT9001 Send your identification number to yours callers (ISDN service) • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «TRANSFER TEL.NO.» feature.
Customizing the WT9001 Select the call forward type • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «CALL FORWARD» feature. • Press the OK button.
Customizing the WT9001 Specify the call forward operating mode • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «CALL FORWARD» feature. •...
Customizing the WT9001 Specify the time for a delayed call forward • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «CALL FORWARD» feature.
Customizing the WT9001 Specify the forwarded-to extension number • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «CALL FORWARD» feature. • Press the OK button.
Customizing the WT9001 View your call charges (system feature) • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «SET-UP MENU» feature. •...
Customizing the WT9001 Administer the call filters • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «CALL FILTER» feature. • Press the OK button.
Customizing the WT9001 Prevent specific trunk calls being received at your phone You do not wish to receive any call from the outside parties whose telephone numbers are stored into the call filters. • Press the ON/OFF HOOK button. •...
Customizing the WT9001 View the list of the last 10 unanswered trunk calls (system feature) Note: If telephone numbers are stored in the list, “CALL LIST” will be displayed at your cordless phone in idle state. • Press the ON/OFF HOOK button.
Customizing the WT9001 Lock your cordless phone keypad (telephone feature) You may lock your cordless phone keypad to prevent any unintentional use. • Press the Menu button. • Press the * button. MENU: KEYBOARD OFF <> 100% To unlock the keypad, repeat the above steps.
Customizing the WT9001 Second procedure (system feature): • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «SET-UP MENU» feature. • Press the OK button.
Customizing the WT9001 Delete customized parameters using the system menu • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «SET-UP MENU» feature.
Additional system features Additional system features Change the system PIN (system feature) • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «SET-UP MENU» feature. •...
Additional system features Change your own class of restriction (system feature) Among the five different classes of restriction, two of them have been assigned to your cord- less phone by the system manager. You may switch between the “enhanced” (1) and the “standard”...
System features available at the administrator phone System features available at the administrator phone Set the date and time (system feature) • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «SET-UP MENU» feature. •...
System features available at the administrator phone Delete the cordless phone PINs (system feature) • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «SET-UP MENU» feature. •...
System features available at the administrator phone Change all the cordless phone CORs (system feature) Among the five different classes of restriction, two of them have been assigned to the cord- less phones by the system manager. You may switch between the “enhanced” (1) and the “standard”...
System features available at the administrator phone Change a cordless phone COR (system feature) Among the five different classes of restriction, two of them have been assigned to the cord- less phones by the system manager. You may switch between the “enhanced” (1) and the “standard”...
System features available at the administrator phone Change from day to night incoming call destination (system feature) This can be done in two ways: manually and automatically. Manually • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel.
Page 40
System features available at the administrator phone Automatically • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «CALL VARIANT» feature. • Press the OK button. CALL VARIANT MSN 4820 <>...
System features available at the administrator phone Administer call charges (system feature) Notes: - View the call charges and Reset counters are features that are available to the ‘Call charges administrator’. - Printing options are available when a printer is connected to the system V24 interface. View the call charges for all the cordless phones •...
System features available at the administrator phone Reset counters for all the cordless phones • Press the ON/OFF HOOK button. • Press the Menu button. PLEASE DIAL MENU: >List <Tel. System> • Press the Previous or Next button to select the «SET-UP MENU» feature. •...
Additional information Additional information Care of your cordless phone Your phone has been designed to withstand everyday use. To avoid extensive damage: • Avoid dropping your phone. • Avoid subjecting your phone to extremes in temperature. • Do not use solvents or polishes to clean your phone. Wipe over with a damp antistatic cloth.
Page 44
Lucent Technologies BCS Service Documentation Technique ZI Saint Lambert • 49412 SAUMUR CEDEX • FRANCE The information in this document is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this document.