Setting Up, Backing Up, Restoring, And Recovering Windows 7; Setting Up The Windows 7 Operating System; Installing Or Upgrading Device Drivers - HP Workstation User Manual

4 Setting up, backing up, restoring,
and recovering Windows 7
This chapter provides setup and update information for the Windows 7 operating system. It includes
these topics:
Setting up the Windows 7 operating system on page 22
Backing up, restoring, and recovering Windows 7
on page 23
CAUTION:
operating system is successfully installed. Adding hardware might cause errors and prevent the
operating system from installing correctly.
NOTE: After you set up the operating system, be sure the latest BIOS, drivers, and software updates
are installed on the workstation. Refer to the chapter on updating the workstation.

Setting up the Windows 7 operating system

CAUTION:
Turning off the workstation during installation can damage the installation and operation of the
software.
For complete installation and configuration instructions, see
windows7/help. Additional information is available in the online help tool after you successfully install
the operating system.

Installing or upgrading device drivers

You must install the appropriate device drivers before you install hardware devices. Follow the
installation instructions that came with the device. For optimum performance, your operating system
must have the most recent updates, patches, and software fixes. For additional driver and software
update information, refer to the chapter on updating the workstation.
22 Chapter 4 Setting up, backing up, restoring, and recovering Windows 7
Topics
Do not add optional hardware or third-party devices to the HP workstation until the
After installation has started, do not turn off the workstation until the process is complete.
http://windows.microsoft.com/en-US/