Install The Air Baffle - HP ProLiant DL560 Gen8 User Manual

CAUTION:
Detaching the cable causes any unsaved data in the cache module to be lost.
IMPORTANT:
board installed.
Remove the air baffle.
6.

Install the air baffle

WARNING:
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
To install the component:
Power down the server (on page 18).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 18).
3.
Remove the access panel (on page 20).
4.
CAUTION:
Detaching the cable causes any unsaved data in the cache module to be lost.
Do not detach the cable that connects the battery pack to the cache module.
It is necessary to remove the PCI riser cage only if there is a full-length expansion
To reduce the risk of personal injury, electric shock, or damage to the equipment,
For proper cooling, do not operate the server without the access panel, baffles,
Do not detach the cable that connects the battery pack to the cache module.
Operations 24