Technical Data; Installation - Westinghouse WSF6605 User Manual

TECHNICAL DATA

Dimensions
Electrical connection
Water supply pressure
Capacity

INSTALLATION

FITTING UNDER A KITCHEN COUNTER
Warning! Make sure that the mains
plug is disconnected from the mains
socket during installation.
Put the appliance adjacent to a water tap
and to a water drain.
The plinth of a freestanding appliance is not
adjustable.
Do not remove the worktop of the appli-
ance if you want to use it as a freestanding
unit.
Remove the worktop of the appliance to in-
stall it under a kitchen counter (820 mm).
If a repair is necessary, the appliance must
be easily accessible for the engineer.
Make sure that the dimensions of the re-
cess agree with the dimensions in the pic-
ture.
Width
Height
Depth
Voltage
Overall power
Fuse
Frequency
min.
max.
Place settings
REMOVING THE WORKTOP
1. Remove the rear screws (1).
2. Pull the worktop behind the appliance
3. Lift the worktop and move it from the
4. Level the appliance using the adjusta-
5. Install the appliance under the kitchen
ADJUSTING THE LEVEL OF THE
APPLIANCE
A correct adjustment of the level of the ap-
pliance allows the door to close and seal
correctly.
(2).
front slots (3).
ble feet.
counter. Be careful not to bend or
squash the water hoses and the mains
cable.
westinghouse 17
596 mm
850 mm
620 mm
220-240 V
2200 W
10 A
50 Hz
50 kPa (7 psi)
800 kPa (116 psi)
13