The sides of the system chassis are provided with tapped screwholes as shown in
FIGURE 2-2
Front of system
FIGURE 2-2
The front flanges (see
column D. Use column B only if the rear flanges are not going to be used.
The support rails (see
4, 7 and 10. The spacers provided must be used between the rails and the chassis to
prevent the rails being fouled by the rivets in the chassis metalwork.
14
Netra ft 1800 Installation Guide • February 1999
.
C
D
1
2
3
4
5
Row numbers
6
7
8
9
10
Location Matrix For Mounting Flange Screws (19-inch rack)
FIGURE 2-6
FIGURE 2-7
Columns
B
A
on page 17) are screwed to holes in column C or
on page 19) are screwed to holes A and B in rows 1,
Rear of system
Support rails
(340-5484)