Table of Contents
Advertisement
Installing the HBA Driver With
Windows 2000 or Windows Server 2003
Operating Systems
The Windows 2000 and Windows Server 2003 operating systems are supported on
the single and dual port HBAs. Before installing the drivers for Windows, you must
have the relevant Windows OS installed on your hard disk. The driver kit, which
includes utilities, is available for download as a self-extracting .exe file at the
Emulex web page dedicated to Sun products. The installation documentation is
available from the same page as the driver kit.
The SCSIport Miniport driver supports the 32-bit Windows 2000 and Windows
Server 2003 only. The Storport Miniport driver can run on 32-bit and 64-bit Windows
Server 2003.
To Install the HBA Driver
▼
Follow these steps to download and install the Windows HBA Driver Kit.
1. Go to http://www.emulex.com/ts/docoem/Sun/10k.htm.
The Emulex main download page for Sun StorageTek Fibre Channel Host Bus
Adapters is displayed.
2. Click the SG-XPCI1FC-EM4-Z and SG-XPCI2FC-EM4-Z Host Adapters link.
The Emulex Sun StorageTek SG-XPCI1FC-EM4-Z and SG-XPCI2FC-EM4-Z Host
Adapters web page is displayed.
3. In the Latest Released Driver for Windows section, under Windows Server
2003 and Windows Server 2000, click the download link for the driver kit.
4. For the Complete Manual, click the Manual link to open the Emulex Storport
Miniport Driver or SCSIport Miniport driver.
5. Follow the instructions in the manual to install the HBA driver.
Note – To create a Windows boot disk, see
page
32
Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007
33.
"To Create a Windows Boot Disk" on
Advertisement
Table of Contents
