Table of Contents
Advertisement
▼
To Download the Patches
Perform the following steps to download the Solaris 10 patches.
1. Go to http://sunsolve.sun.com.
The SunSolve Online license agreement page displays.
2. Accept the License Agreement.
The SunSolve Online page displays.
3. Under Patches and Updates, click PatchFinder.
4. Download one of the following patches by typing the patch ID (without the
dash number) in the Enter Patch ID box and click Find Patch.
120222-08 (or above) Sun OS 5.10: Emulex-Sun Fibre LightPulse Channel Adapter
■
driver
120223-08 (or above) Sun OS 5.10_x86: Emulex-Sun Fibre LightPulse Channel
■
Adapter driver
5. Follow the instructions in the patch README to install the patch.
6. Reboot your system after installing the patch.
Diagnostic Support
Diagnostic support for the Sun StorageTek Enterprise PCI-X 4 Gb FC Single and
Dual Port Emulex HBAs is available with SunVTS™ software, and the required
patches are listed in
Required Patches
TABLE 4-2
Operating System
Solaris 8 for SPARC
Solaris 9 for SPARC
Solaris 10 for SPARC
Solaris 10 for SPARC
Solaris 10 for x64/x86
Solaris 10 for x64/x86
.
TABLE 4-2
SunVTS Version
Patch Number
5.1
121422-01
5.1
121422-01
6.0
119838-03
6.1
None required
6.0
119839-03
6.1
None required
Chapter 4 Software Installation
29
Advertisement
Table of Contents
