Table of Contents
Advertisement
LED Indicator Status Definitions (Continued)
TABLE 3-2
Green LED
Slow Blink
Fast Blink
Fast Blink
Fast Blink
Fast Blink
Fast Blink
To Verify Proper Installation in SPARC
▼
Platforms
1. Enter the show-devs command at the ok prompt to list the installed devices.
The single and dual port HBAs can be identified in the output containing the
SUNW,emlxs@n and SUNW,emlxs@n,1 node names, where n is usually a single-digit
number from 0 to 9.
Yellow LED
State
Flashing
Restricted Offline Mode,
test active
Off
Debug Monitor in Restricted
Mode
On
Not defined
Slow Blink
Debug Monitor in Test Fixture
Mode
Fast Blink
Debug Monitor in Remote
Debug Mode
Flashing
Not defined
Chapter 3 Hardware Installation
19
Advertisement
Table of Contents
