Final Assembly; Warning - Emerson CF430BS00 Owner's Manual

BP7486 CF430 Highrise OM
6.1
Slide the fan blade through the blade slot in the
flywheel. (Figure 12).
Mount the fan blade to the fan housing using three
#8 - 32 x 11mm washer head blade screws (Figure 12).
NOTE: Take care not to scratch fan housing
assembly when installing blades.
Complete installation of the remaining three blades per
the above instructions.
!
To reduce the risk of personal injury, do not bend the
blades when installing, balancing the blades or
cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
6.2
Remove one of the three #6 - 32 x 3/8" truss head
screws from the motor housing (Figure 13). Retain the
screw for future installation. Loosen the other two
screws.
Place the light kit plate adapter onto the motor housing.
Rotate the cover to engage the two loosen screws and
tight the two loosened screws.
Reinstall the #6 - 32 x 3/8" truss head screw (previously
removed) into the light kit plate adapter to secure.
6.3
Engage the fan motor assembly connector to the light
fixture assembly connector until you hear a snap
(Figure 14).
12/13/13 10:35 AM Page 11

6. Final Assembly

WARNING

#8 - 32 x 11mm WASHER HEAD
BLADE SCREWS (3 per blade)
Figure 12
Figure 13
FAN MOTOR
ASSEMBLY
CONNECTOR
LIGHT FIXTURE
ASSEMBLY
CONNECTOR
Figure 14
Please contact 1-800-654-3545 for further assistance
11
BLADE SLOTS (4)
FAN BLADES (4)
LIGHT KIT
PLATE
ADAPTER
#6 - 32 x 3/8" TRUSS
HEAD BLADE SCREW
emersonfans.com
ETL Model No.: CF430